• Company Profile
  • Trouble Shooting
    • Engine will not crank
    • Engine hard to start
    • Engine starts but not running
    • Surging (speed change)
    • Rough idle
    • Engine runs rough or misfiring
    • Engine RPM not reach speed
    • Low Power
    • Excessive exhaust smoke
    • Coolant temperature above normal
    • Coolant temperature below normal
    • Coolant loss
    • Lubricating oil pressure low
    • Oil pressure too high
    • Lube oil loss
    • Contaminated coolant
    • Contaminated Lube oil
    • Oil leaking from exhaust
    • Compression knocks
    • Excessive fuel consumption
    • Engine will not shut off
    • Excessive vibration
    • Excessive engine noises
    • Alternator not charging
  • Warranty
  • Contact Us

Menu

  • Drivetrain Troubleshooting
  • Automotive Engeneering
  • Field Services
  • Motor Oils
  • Slick 50
  • Oil Sampling
  • Oil analysis
  • Used Speres
  • Website Links
  • Installation of Bearings
  • Installation of Pistons











Home

Slick 50

SLICK 50
ENGINE FORMULA
is a unique system designed to provide maximum
protection. It is a propriety blend of five scientifically formulated
compounds. Working together they help to bond a specially-processed
Teflon to the metal parts of in your engine To provide maximum protection
which last for 80,000 kms or more throughout successive oil changes.

Read more about our

Slick 50 Success Story


TREAT ONCE - NOT AFFECTED BY OIL CHANGES

Because it is a metal treatment, It doesn't matter how many times
you change your oil. Unlike an addictive which is drained away at
each oil change. SLICK 50 remains bonded to the metal surfaces,
so you only need to use once every 80,000 kms.

START UP
PROTECTION


When your engine is switched off, the SLICK 50 doesn't drain back
into the sump, but stays bonded to the crucial working parts to
protect your engine every time you turn the key. SLICK 50 is there
when your oil isn't.

REDUCED FRICTION


When the engine is up and running normally, or when you are stressful
situation such as towing or start traffic-real killers for your
engine. SLICK 50 is there full time, reducing friction and drag,
and improving performance.

A SECOND
CHANCE TO AVOID A COSTLY REBUILD


In the event of oil failure or breakdown, SLICK 50 can protect your
engine from an otherwise inevitable seizure. It gives you a second
chance to stop safely and save your engine from a major repair bill.

TREAT ANY
ENGINE - PETROL , DIESEL,LPG- (NEWLY RUN IN TO OLD )

Your
engine made of metal . It doesn't matter whether it's LPG, diesel,
petrol, turbocharged, 2 stroke, high performance rotary, or old
or newly, run in SLICK 50 will treat and protect your engine . But
it is not a mechanic in a bottle. It doesn't replace worn metal,
but it will protect metal that there and significantly increase
the life of your engine.

THERE WHEN
IT IS NEEDED MOST


SLICK 50 gives your engine full time protection , during the easy
times and the tough times. In fact SLICK 50 actually becomes more
effectively when load increases - when it is needed most - at start
up ,oil film breakdown due to high temperature and excessive loads,
or pump failure. SLICK 50 protects when your oil can't. Think of
it as silent partner for your oil and engine.

 

Contact Us | Terms of Use | Trademarks | Privacy Statement
Copyright © 2009 Brockwell Engeneering. All Rights Reserved.

Designed by Scorpnet Webdesign.